Hybrid Connectors – More than the Sum of Their Parts

Hybrid ConnectorsMore than the Sum of Their Parts

Gerhard Liewer,
Product Marketing, Pluscon circular,
Phoenix Contact 

Equipping machines, systems, and automation components with separate cables for signals, data, and power is time consuming and costly. With more complex regulations and control tasks comes greater cabling complexity and, thus, a greater impact on the availability of the entire system. Hybrid connectors – for transmitting signals, data, and power over a single cable – offer a way out of this dilemma.

The versatile hybrid connectors are more than the sum of their parts: they provide a new level of flexibility when cabling highly automated systems. Along with the established application for cabling servo motors, M23 and M40 hybrid connectors are well-suited for a variety of sophisticated tasks.

Figure 1. Intelligent solution: hybrid connectors simultaneously trans- mit signals, data, and power.

Hybrid connectors for serial cabling

In frequency-controlled drive solutions, the circuit connecting the control cabinet to the engine still commonly uses a star distribution. Previously, almost all serial cabling solutions were bus systems. Hybrid connector technology, now available in M40 size, can now be paired with hybrid servo cables. This makes it possible to implement serial communication with signals, data, and power. To do this, each device in the supply chain is equipped with two device connectors. One of these is equipped with pin contacts and the other with socket contacts. The connectors are based on the familiar servo motor design and combine suitable contacts for transmitting signals, data, and power in one housing. This makes hybrid connectors suitable for high voltages and currents.

Higher system availability, lower costs

Hybrid connection technology does more than just reduce the space requirements on the device or in the control cabinet. Machine and system cabling has become much more organized, because it only requires routing a single cable. The resulting narrower cable routes also reduce the costs for the cable run and cable duct.

Hybrid system cabling also offers easy start-up and repairs for devices, machines, and system parts, as it reduces required connections by two-thirds. For example, many machine and system builders carry out the startup process during in-house manufacturing. After successfully passing this test, the systems must be quickly and securely dismantled, packaged, and shipped, and then once again brought into operation by the end customer. A fast-locking connection system is particularly helpful in these cases. Just half of a turn reliably locks the cable connector system to its counterpiece. Devices can be connected quickly and reliably in this way with only two hand movements (Figure 2).

Figure 2. Fast-locking system: SPEEDCON locks cables and device connectors with just half a turn.

More functionality, same size

The newest M40 hybrid connectors have a broad area of application. For example, for distributed servo drivers, some models implement a three-phase supply including L1-:3, N, PE signals as well as direct current supplies with up to 850 V DC. Connectors that use different codings and colored housing markings can help prevent incorrect insertion.

Figure 3. Space advantage: round hybrid connectors are compact and as a result save a great deal of space.

Easy, reliable assembly can be enabled by choosing models designed with larger, more robust contacts. Regardless of the connector size, variations that use four-position CAT5 elements for data transmission are great due to their compatibility with nearly all common bus systems and custom data interfaces.

Versions for numerous applications

The CAT5 data element can be replaced by a 4-position unshielded signal element in applications that do not require a shielded data interface. For this reason, a connector is available with eight 1 mm signal contacts, which offers the same performance features as the power contacts. Currents up to 8 A per contact and a wire cross section up to 1.5 mm² make it possible to implement applications for control electronics including hardware shutdowns. Signal contacts allow voltages of up to 500 V AC to be supplied, thanks to appropriate air clearances and creepage distances (Figure 4).

Figure 4. Transmission in the most confined space: featuring four contacts per signal (top left and right), data (center), as well as power (bottom), and +PE (top), the M40 hybrid connector allows for versatile use

Numerous housing designs are available both in terms of cabling and devices. Customer-specific designs, even entire system cabling options, are available. The user receives tested fully cables, even for high power and data rates.

Summary

Automation technology is advancing steadily, especially in relation to the Industrial Internet of Things (IIoT). As part of this, large companies in the automation industry are opting to consistently network their products on the controller and communication level. Industrial applications, machines, and systems are equipped with intelligent control units and interfaces on an ever more regular basis. There is an enormous range of applications for M23 and M40 hybrid connectors, as this affects almost all areas of automation.

About Phoenix Contact

Phoenix Contact produces fu- ture-oriented components, systems, and solutions for electrical controls, networking, and automation. With a worldwide network reaching across more than 100 countries with over 17,100 employees, Phoenix Contact maintains close relationships with its customers, which are essential for shared success.The company’s wide variety of products makes it easy for engineers to implement the latest technology in various applications and industries.

 

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Contact Us

We'd love to hear from you! Send us a quick note and we'll get back to you ASAP.

Not readable? Change text. captcha txt

Start typing and press Enter to search